Safety Rules - Upright SL-26NBE Guide De L'opérateur

English Language Section
NEVER operate the machine within
ten feet of power lines.
THIS MACHINE IS NOT INSULATED.
N operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps
EVER
and debris.
N operate the machine if all guardrails are not properly in place and secured with all fasteners properly torqued.
EVER
S
and lock gate after mounting platform.
ECURE
N
use ladders or scaffolding on the platform.
EVER
N attach overhanging loads or increase platform size.
EVER
L
up, down and around for overhead obstructions and electrical conductors.
OOK
C all four tires for correct inflation. See specifications.
HECK
D
all loads evenly on the platform. See the back cover for maximum platform load.
ISTRIBUTE
N
use damaged equipment. (Contact UpRight for instructions. See toll-free phone number on back cover.)
EVER
N change operating or safety systems.
EVER
I
the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, damaged control cable, loose
NSPECT
wire connections and wheel bolts.
N
climb down elevating assembly with the platform elevated.
EVER
N
perform service on machine while platform is elevated without blocking elevating assembly.
EVER
N recharge battery near sparks or open flame; batteries that are being charged emit highly explosive hydrogen
EVER
gas.
A U secure the work platform against unauthorized use by turning key switch off and removing key.
FTER SE
N
replace any component or part with anything other than original UpRight replacement parts without the manu-
EVER
facturer's consent.

Safety Rules

NEVER elevate or drive elevated on
uneven slopes or soft ground or ele-
vate the platform unless the platform
is level.
2
NEVER sit, stand or climb on guard-
rail or midrail.