Appendix (English); Technical Specifications - HEADRUSH FRFR-108 Guide D'utilisation

Appendix (English)

Technical Specifications

Output Power
Drivers
Crossover Frequency 2.5 KHz
Maximum SPL
Frequency Response 62 Hz – 20 kHz
Frequency Range
Horn Coverage
Equalization
Connectors
Controls
Indicators
Protection
Power
Enclosure
Mounting
Dimensions
(height x width x depth)
Weight
Specifications are subject to change without notice.
Trademarks & Licenses
HeadRush is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. Avid and
Eleven are registered trademarks of Avid Technology, Inc. in the U.S. and other countries. All other
product names, company names, trademarks, or trade names are those of their respective owners.
2000 W
(peak, 1300 LF + 700 HF)
1000 W
(continuous RMS, 650 LF + 350 HF)
Low-Frequency 8.0" (203 mm) driver, 2.5" (65 mm) high-temperature
High-Frequency 1.4" (35 mm) neodymium driver with precision
129 dB , 126 dB
(peak)
(+3 dB)
52 Hz – 22 kHz
(-10 dB)
90º horizontal x 60º vertical
Contour switch with low- and high-frequency +3 dB boost
(2) XLR/TRS 1/4" (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Power switch, (2) volume control knobs
ground-lift switch
Power LED
(rear panel)
Electronic clip, thermal & transducer overdrive
Connection IEC
Input Voltage 100 V~, 110–120 V~, 220–240 V~; 50/60 Hz
100–120V T10AL AC250V
Fuse
220–240V T5AL AC250V
Consumption 800 W
Trapezoidal, injection-molded polypropylene enclosure with perforated
steel grille
Standard 36 mm pole socket
17.1" x 10.1" x 9.6"
434 x 256 x 245 mm
20.2 lb.
9.2 kg
voice coil
waveguide
(continuous) (dB-SPL @ 1 m)
(nominal)
(1 per input)
, clip limiter LED
, EQ contour switch,
(switchable)
27