V.1. Control (Integral Or Remote Control); V.2. Example Parameter Settings - Vortice VORT NRG ECR Notice D'emploi Et D'entretien

ENGLISH
V PARAMETER DEFINITION

V.1. Control (integral or remote control)

The VORT NRG ECR system is supplied with an ED-TOUCH remote control as standard. Through this remote control you
will be able access to the setting emulator. Refer to the ED-TOUCH instructions.
From the setting emulator you can access all the functions and screens described below.
• The Up, Down, Left and Right arrows keys are used to navigate the menus.
• The Up and Down arrow keys are also used to increase or reduce the value of a parameter, while the Right and Left
arrow keys are used to navigate within a parameter.
• The OK key is used to enter and confirm a value, while the C key serves to cancel it.
• The alarm key (red) gives access to the predefined list.
• The left arrow is also used to exit the alarms menu and return to the main menu
• The cursors indicate the possible movements and which keys you can press.
Arrows
(Directional
buttons
MENU)

V.2. Example parameter settings

• Move the cursor to desired menu
24
warning
or
100 meter
Possibility to go up
Cursor
Analogic imput:
Digital imput:
Analogic output:
Digital output:
Possibility to go down