Technical Data - SIKA DiTemp 930-40 Notice D'utilisation

Technical Data

Disposal:
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device must
be disposed of separately as electrical and electronic waste.
No household waste!
The DiTemp consists of various different materials. It must not be disposed of with
household waste.
 Dispose of the battery in accordance with the manu-
facturer's instructions.
 Take the DiTemp to your local recycling plant
or
 send the DiTemp back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
10 Technical Data
The technical data of customised versions may differ from the data in these instructions.
Please observe the information specified on the type plate.
DiTemp
Measuring input
Reading range
Resolution
Accuracy
Housing
Degree of protection
Ambient temperature
Power supply
- Service life battery
Measuring cycle
Display:
- Analogue
- Digital
Remote thermometer for explosive atmospheres:
Measurement circuit with type of protection "intrinsically safe" EEx ia IIC only for connection to re-
spective pick-ups with a maximum cable length of 10 m
For explosive atmospheres
- by gas
- by dust
- 28 -
Pt1000 / 2-wire
See type plate
0.1 °C in range -40.0...199.9 °C, else 1 °C
±1 % full scale ±1 digit
Round-face housing, stainless steel 1.4301,
diameter 80 mm
IP65 (front side)
-20 °C ... +60 °C
Lithium battery
approx. 10 years
3 s
Bar graph 61 bars
4-digit, 7-segment display, 11 mm high
Maximum surface temperature 200°C
Maximum housing temperature 90°C
© SIKA • Ba_DiTemp_en • 06/2017
DiTemp