GB
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.
General Description
The illustration how to handle the
appliance can be found on page
2-3.
Extent of delivery
-
Long-handled hedge trimmer (two-
part)
-
Blade protection
-
Leg protection
-
Shoulder strap
-
Anterior cantilever chain saw
-
Blade, sawing chain, Blade protective
cover
-
Instruction Manual
Function Description
The electric hedge trimmer is driven by an
electronic motor. The equipment is double-
insulated for safety and does not require
earthing.
The device is equipped with a hedge trim-
mer attachment (with safety cutter bars)
and a chain saw attachment (with blade
and sawing chain).
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and
briars.
Please note the following descriptions for
the function of the operating components.
118
Overview
Long-reach hedge trimmer
A
1 Safety blade
2 Gearbox
3 Lubrication port
4 Stop lever fixing
5a Stop lever
5b Safety lever
6 Handle for adjusting the blade
beam
7 Front arm
8 Safety button
9 Pivotal centre
10 Round handle
11 Safety slide
12 Deadman switch
13 On/off switch
15 Mains cable
16 Shoulder strap
17 Eye (for shoulder strap)
18 Leg protection
19 Blade protection
Chain saw attachment
20 Sawing chain
21 Blade
22 Spiked bumpers
23 Blade fixing screws
24 Chain wheel cover
25 Anterior cantilever chain saw
26 Oil tank cover
27 Oil tank
28 Fastening plate
29 Blade protective cover
C
30 Square nuts
31 Screws
32 Assembly block