Typical Applications; Installation; Electrical Connections; Maintenance / Cleaning - Vortice A-E Notice D'emploi Et D'entretien

ENGLISH
Typical application
Fig. 3÷7;
N.B.
If the appliance is installed at a height of less than 2.5
metres from the floor, it is obligatory to install
protection for moving parts, in the form of a safety
grille and gravity louvre (fig. 5, 6).

Installation

Fig. 8÷17;

Electrical Connections

Single-phase electrical connection (fig.13)
Single-phase models are equipped with a self-
resetting thernal cut-out inside the motor, excluding
the model 504 M / 566 M which is equipped with a
termal protector to be connected in series to a
magnetothermal motor protection .
Three-phase electrical connection (fig.14)
Three-phase models are fitted with thermal protection,
which must be connected
thermomagnetic motor overload cutout.

Maintenance / Cleaning

Fig. 18÷22.
in series to a
Important information
concerning the
environmentally compatible
disposal
This product complies with Directive 2012/19/EU on
the management of waste electrical and electronic
equipment (WEEE).
The crossed-out wheeled bin symbol on
the appliance indicates that, at the end of
its useful life, the product must be taken to
a specialised company for transport and
treatment. This company will take care of
the disposal of the various materials
making up the product
subsequent proper recycling.
Alternatively, the manufacturer of the appliance is
obliged to take back the product to be disposed of in
exchange for the purchase of an equivalent appliance.
and their
9