Mounting The Drive Unit; General Assembly - Dometic 8882040004 Instructions De Montage

Frigo
13

Mounting the drive unit

13.1

General assembly

➤ Mount the drive unit using the rubber
dampers on the chassis.
➤ Open the compressor locking plate.
➤ Remove the two O-rings from the under-
side of the rubber seal and insert into
the compressor's O-ring seat.
➤ Loosely attach the connection adapter
on the compressor.
➤ After installing the refrigerant lines, turn
the adapter according to the installation
position.
➤ Fasten the connection adapter with the
correct fastening torque.
22
Mounting the drive unit