Ramiaudio CSS205 Manuel Utilisateur page 29

MIB II system group: user-defined settings in the standard SNMP header.
- SysContact : The contact person for this managed device.
- SysName: An administratively-assigned name for this managed device.
- SysLocation: Location of the unit.
 SNMP Trap
Don't forget to save your config
Status main audio input
Status Backup audio input
Active logical audio input
Audio output
Audio switching fonction enabled
RAMI
WEB INTERFACE - next -
Valid (1) or invalid (2)
Valid (1) or invalid (2)
Main (1), backup (2) or SD card (3)
Present (1) or not present (2)
Enabled (1) or not enabled (2)
29
SNMP trap destination: define target destinations A
and B for sending SNMP traps.
- Type : specifies if the trap use inform or V2 format.
- Number of Retries : specifies a maximum number of
times to resend an inform request
- Timeout(sec): specifies a number of seconds to wait
for an acknowledgment before resending
- Community: textual name of the group for SNMP
trap being sent.
- IP adress: destiation adress where the SNMP trap will
be sent.
- Enable: Enables transmission of SNMP traps to this
destination.
Checkbox to enable the sending of the SNMP trap.
RAMI - CSS205