Changing The Grill Burner Nozzle; Important; Checking Functioning; Maintenance - Lotus TPT-64G Instructions Pour L'installation Et L'emploi

Cuisieneres avec four usage professionale

Masquer les pouces

Table des Matières

Les langues disponibles

•

Substitute the nozzle using a suitable spanner (2) (see the "Technical Data" table).

•

After this procedure, fix the burner again.

•

Regulate the air regulating bush (4) to the corresponding value given in the "technical data" table, unscrewing

the securing screw with relative check nut, regulate the minimum by turning the screw (Fig.F, 1) to the right or

left until the thermal power reaches 1,15 kW: this procedure is possible only after having let the oven burner

work at maximum output for about 20 minutes.

Then turn the thermostat round to the minimum position and adjust.

After regulating, check lighting at both maximum and minimum output. Make sure that, when changing

rapidly from minimum to maximum output, the flame does not present any problems and does not go out when

closing or opening the oven door quickly.

Warning: When working with liquid gas the regulating screw must be screwed right down.

To change the nozzle unscrew the securing screws, move the burner to the right and unhook it. Unscrew the nozzle

(2) with a suitable spanner and change it (see the "Technical Data" table). Regulate the air regulating bush (4) to the

corresponding value given in the "Technical Data" table, unscrewing the securing screw with relative check nut. No

adjustment is necessary for the minimum output because the burner works only with a fixed flame.

Important!

After you have converted the cooker to work with a different type of gas the rating plate must be updated, specifying

the type of gas the appliance is now working with.

•

The appliance contains the instructions necessary for use.

•

Check the appliances for gas leaks.

•

Check the lighting and flame of the main burner.

•

We urge the user to follow the instructions when using the appliance.

With prolonged use of the appliance, it is essential to carry out regular maintenance for the safe functioning of the

appliance; we therefore recommend drawing up a contract for after sales service.

Maintenance must be done only by specialized personnel, observing the norms in force and our indications.

All plate:

It is possible to substitute the spark plug cock, thermocouple and burner after having removed the front panel.

Open rings:

The cocks can be changed by removing the front panel; to change the thermocouples and burners you have to remove

Gas oven

The gas-cock, timer, thermocouples, burners and ignition plugs can be changed by accessing them inside the oven

and/or by removing the bottom oven panel or control panel.

Electric oven

Is it possible the replacement of heating element and the thermostat

•

Cut power off to the appliance

•

Remove the glass cover from the lamp holder

•

Unscrew the lamp

•

The new lamp must have the following characteristics:

•

be able to withstand a heat of up to 300°C

•

power: 15W.

•

voltage: 230V 50Hz.

Attention! The appliance must only be used under surveillance.