BEFORE YOU BEGIN:
Read instructions completely before beginning
location for the attic ladder and the ability to safely and properly install it.
Are you capable of installing this attic ladder?
To install this attic ladder you should have sawing, squaring, and aligning skills similar to those required to install a
window or a door frame. If you do not have these skills you should hire a professional carpenter to install this unit
(see the Yellow Pages under "Building Contractors, Carpenters, Home Builders, Home Improvements, or Contractors-
General").
Does this attic ladder meet your needs?
This attic ladder is for residential use only. Installing this attic ladder in commercial buildings and apartments may
violate building codes that require fire-rated ceilings and prohibit storing materials in the overhead space! Check with
your local fire marshal or building department before installing the attic ladder.
The capacity of the attic ladder (person plus materials being carried) is 375 pounds.
This attic ladder is made for the range of ceiling heights 7'8" to 10'3". Do not install the attic ladder in a ceiling that
has a height outside of this range. Altering the attic ladder to accommodate other heights is unsafe.
a.
To save time and prevent accidents, inspect the attic ladder for shipping damage before beginning
the installation.
• Check wooden door panel for splits and warpage
• Check all metal parts for damage such as bends and cracks
• Check that all rivets are tight
If any items are missing or damaged, contact the point of purchase or Werner Co. customer service
at 888-523-3370
b.
You must have
• 2 people who are capable of lifting the 50 pound attic ladder into the overhead space
c.
You must have:
• A rough opening in the ceiling measuring 22-1/2" x 54" for the AH2210 and AE2210, and 25" x 54"
for the AH2510. If not, proceed to the Appendix, Section 1.1, page 12.
d.
Verify clearance requirements:
• See Appendix, Section 1.3, Figure 3, page 14
Step-by-Step Installation Made Easy Online video
www.wernerladder.com/atticladder
. This is necessary to ensure that you have a suitable
3