Explanation Of The Warning Signs On The Equipment - Nakayama 310.200.650 Traduction De La Notice D'emploi Originale

42. Check the grass bag at regular intervals
for signs of wear and to ensure that it is still in
perfect working order.
43. Before you adjust or clean the mower or
check whether the mains lead is kinked or
damaged, switch off the mower and disconnect
the plug from the power supply.
44. The connection sockets on the connectors
must be made of rubber, soft PVC or other
thermoplastic material with the same strength
or they must be coated with this material.
45. Ensure that you do not push the mower over
routes that might hamper the free movement of
the extension cable.
46. Do not switch the mower on and off
frequently over a short period of time, and in
particular do not play with the ON/OFF switch.
47. As a result of the voltage fluctuations this
mower causes as it gets up to speed, other
equipment connected to the same circuit may
suffer faults if the mains supply is not in perfect
condition. In this case suitable action has to
be taken (for example connect the mower to a
different circuit or run the mower on a circuit
with lower impedance).
48. This equipment is not designed to be used
by people (including children) with limited
physical, sensory or mental capacities or
those with no experience and/or knowledge
unless they are supervised by a person who is
responsible for their safety or they have received
instructions from such a person in how to use
the equipment safely. Children must always be
supervised in order to ensure that they do not
play with the equipment.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety
regulations and instructions may result in an
electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
2. Explanation of the warning signs on
the equipment
Warning!
Read all safety regulations and
instructions before operating the
machine.
Keep all other persons away from the
danger zone.
Caution! -Sharp blades
Before carrying out any maintenance
work or if you damage the cable, pull
the plug out of the socket.
Do not expose the equipment to rain
or moisture.
Caution: Keep the power cable away
from the cutters!
If the cable is damaged or cut through
while working, do not touch the
cable but immediately pull the mains
plug. Never use the machine with a
damaged cable.
Wear safety goggles.
15