TrekStor i.Beat censo Mode D'emploi page 8

5) Firmware update for the TrekStor
a) Connect the i.Beat censo to a USB port on your PC.
EN
b) Back up all the important files on your i.Beat censo onto your PC.
c) You can update the i.Beat censo with the most current firmware from the Internet (on the TrekStor
homepage at http://www.trekstor.de).
d) Download the firmware (*.zip-file), and unzip it to a folder of your choice.
e) Follow the attached update instructions.
Warning: Please read all of the update instructions, and follow the update procedures exactly to keep from
damaging the i.Beat censo!
6) Formatting the TrekStor
a) Connect the i.Beat censo to a USB port on your PC.
b) Back up all the important files on your i.Beat censo onto your PC.
c) Open "M
y
d) Select "f
orMAt
e) Select the "fAt32" option under "f
f ) Click the "s
7) Controls for the TrekStor
Turning the device on and off
Turn on the i.Beat censo by briefly pressing the
button for approximately 3 seconds.
Note: Make sure that the
If the button lock is activated, the button lock symbol will appear.
Different modes
The i.Beat censo has different modes. To go to a mode, briefly press the
button to select the desired mode, and confirm by briefly pressing the
H
pressing the
Mode: Music
Switch to "M
Usic
• Playback
Briefly press the
• Pause
Briefly press the
• Stop
Press the
A
playback at the beginning of the song.
c ", and click your right mouse button on "d
oMpUter
..." from the context menu.
" button to start the formatting.
tArt
switch has been moved to the left position, i.e., that the button lock is turned off.
s
button.
i
" mode.
button to play an audio file.
A
button to stop playback. Repress the
A
button for approximately 1 second to stop playing the file. Repress the
i.Beat censo
i.Beat censo
" from the dialog window that appears.
ile systeM
i.Beat censo
button. To turn the i.Beat censo off, hold the
A
– 8 –
r s
evices With eMovAble torAge
button. Press the
i
button. Exit the menu by
A
button to continue playback.
A
".
A
or
G
button to start
A