Maytag Neptune MCE8000AYW Guide D'utilisation Et D'entretien page 11

Step 4 Select Options
Wrinkle Prevent – use with any cycle to prevent wrinkles. Provides 20
minutes of continuous tumbling and 75 minutes of intermittent tumbling in
room temperature air following the completion of the cycle. The load can be
removed anytime during Wrinkle Prevent.
Damp Dry Signal – an audible signal will sound when load has reached the
damp dry level in any cycle.
Step 5 Start the Lower Tumble Dryer
Start/Pause – close the door and press the Start/Pause pad to start
the dryer. To interrupt the cycle, press the Start/Pause pad again. The
light above the Start/Pause pad will blink and "PAUSE" will scroll in the
display. After 4 hours in pause, the cycle will be cancelled. Pressing Off
cancels the cycle and stops the dryer.
NOTE: If the door is not closed, "CLOSE door" will scroll in the display. Close
the door and restart.
E T
STIMATED IME
• After pressing Start/Pause, the display will show the estimated
time remaining in the cycle.
I L
NDICATOR IGHTS
• The indicator lights below the dryness levels will light when the dryer is in that part of the cycle.
• The Cool Down indicator light will illuminate when the dryer moves into the cool-down portion of the
cycle.
• If the Wrinkle Prevent option has been selected, the Wrinkle Prevent light will illuminate to indicate that
the load is dry and the dryer has moved into the wrinkle prevent portion of the cycle. The display will show
the wrinkle prevent animation when the dryer goes into Wrinkle Prevent.
• The Complete light will illuminate when the cool down portion of the cycle is completed. If Wrinkle
Prevent has been selected, both Wrinkle Prevent and Complete lights will illuminate. The Complete
indicator will remain illuminated until the door is opened or another cycle is selected.
S V
IGNAL OLUME
The volume of the dryer signal is adjustable. Press
volume. Press to increase the volume.
(if desired)
D
ISPLAY
- C S
YCLE TATUS
to lower the
10