Part Names; Installation - Caso Germany 630 Mode D'emploi

Part Names

1. HINGE
2. LIGHT
3. TEMPERATURE CONTROLLER
4. TEMPERATURE DISPLAY
5. FAN MASK

Installation

Before using the wine cooling cabinet:
•
Ensure that all packaging material has been removed from the exterior and interior.
•
The wine cooling cabinet is not intended for outdoor use.
•
Use a soft cloth and lukewarm water for cleaning the interior.
•
Place your device on a surface with sufficient load bearing capacity for supporting the fully
stocked cabinet.
•
Never place any objects on the device.
•
Maintain a clearance of app. 5 cm on either side and app. 10 cm at the rear to ensure
sufficient air circulation.
•
You can use the legs at the front of the device to adjust its height.
•
Attaching the handle: Please note that you need to screw the supplied stainless steel
handle to the door of the device before using it for the first time. To do this, push aside the
rubber seal on the back of the door to reveal the pre-drilled holes. Use the supplied screws
to attach the handle to the door.
6. SHELF
7. FOOT (3 big, 1 small)
8. DOOR FRAME
9. GLASS
10. HANDLE
12