en - Warning and Safety instructions
The DOS G 7896 unit complies with
all relevant safety requierments. In-
correct use can, however, lead to
personal injury and damage to prop-
erty.
To avoid the risk of accidents and
damage to the appliance please
read these instructions carefully be-
fore starting to use it.
They contain important notes on the
installation, safety, operation and
maintenance of the appliance.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Correct application
~
Please read the instruction book for
the machine that this DOS unit is
connected to.
Technical safety
~
The DOS G 7896 unit must be
checked for any visible damage before
it is installed. Do not install and use a
damaged appliance. A damaged
appliance is dangerous.
~
The DOS G 7896 unit should be
commissioned and then maintained
only by a Miele authorised and trained
service technician or other suitably
qualified and competent approved
person.
~
A damaged DOS G 7896 unit is
dangerous. Switch off at the mains
immediately and call the Miele Service
Department or an authorised Miele
Service Dealer.
8
~
Faulty components must only be
replaced by genuine Miele original
parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
Correct use
~
Take great care when handling
liquid agents and additives. These may
contain irritant or corrosive ingredients.
Do not use organic solvents as these
could cause an explosion.
Follow all relevant safety procedures
carefully. Wear protective gloves and
goggles.
~
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing, to avoid any corrosion damage.
~
While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
~
This accessory must only be used in
conjunction with machines specified by
Miele as being suitable for such use.