Important - Mosa GE 7000 BS/GS Manuel D'emploi Et Entretien

Masquer les pouces Voir aussi pour GE 7000 BS/GS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

MAINTENANCE
REV.0-06/10
l
l
MOVING
l
PARTS
l
can injure
NOTE
By maintenance at care of the utilizer we intend all the
operatios concerning the verification of mechanical
parts, electrical parts and of the fluids subject to use or
consumption during the normal operation of the machine.
For what concerns the fluids we must consider as main-
tenance even the periodical change and or the refills
eventually necessary.
Maintenance operations also include machine cleaning
operations when carried out on a periodic basis outside
of the normal work cycle.
The repairs cannot be considered among the main-
tenance activities, i.e. the replacement of parts subject
to occasional damages and the replacement of electric
and mechanic components consumed in normal use, by
the Assistance Authorized Center as well as by MOSA.
The replacement of tires (for machines equipped with
trolleys) must be considered as repair since it is not de-
livered as standard equipment any lifting system.
The periodic maintenance should be performed accor-
ding to the schedule shown in the engine manual. An
optional hour counter (M) is available to simplify the
determination of the working hours.

IMPORTANT

!
In the maintenance operations avoid that
polluting substances, liquids, exhausted oils,
etc. bring damage to people or things or can
cause negative effects to surroindings, health
or safety respecting completely the laws and/
or dispositions in force in the place.
ENGINE and ALTERNATOR
PLEASE REFER TO THE SPECIFIC MANUALS
PROVIDED.
Every engine and alternator manufacturer has
!
Have qualified personnel do maintenance and troubleshooting work.
Stop the engine before doing any work inside the machine. If for
any reason the machine must be operated while working inside, pay
attention moving parts, hot parts (exhaust manifold and muffler,
etc.) electrical parts which may be unprotected when the machine
is open.
Remove guards only when necessary to perform maintenance,
and replace them when the maintenance requiring their removal is
complete.
Use suitable tools and clothes
Do not modify the components if not authorized.
- See pag. M1.1 -
WARNING
.
maintenance intervals and specific checks for each
model: it is necessary to consult the specific engine or
alternator USER AND MAINTENANCE manual.
VENTILATION
Make certain there are no obstructions (rags, leaves or
other) in the air inlet and outlet openings on the machine,
alternator and motor.
ELECTRICAL PANELS
Check condition of cables and connections daily.
Clean periodically using a vacuum cleaner, DO NOT USE
COMPRESSED AIR.
DECALS AND LABELS
All warning and decals should be checked once a year
and replaced if missing or unreadable.
STRENUOUS OPERATING CONDITIONS
Under extreme operating conditions (frequent stops
and starts, dusty environment, cold weather,extended
periods of no load operation, fuel with over 0.5% sulphur
content) do maintenance more frequently.
BATTERY WITHOUT MAINTENANCE
DO NOT OPEN THE BATTERY
The battery is charged automatically from the battery
charger circuit suppplied with the engine.
Check the state of the battery from the colour of the
warning light which is in the upper part.
- Green colour: battery OK
- Black colour: battery to be recharged
- White colour: battery to be replaced
!
THE ENGINE PROTECTION NOT WORK WHEN THE
OIL IS OF LOW QUALITY BECAUSE NOT CHARGED
REGULARLY AT INTERVALS AS PRESCRIBED IN THE
OWNER'S ENGINE MANUAL.
HOT surface
can
hurt you
NOTE
M
43

Publicité

Table des Matières
loading

Table des Matières