Storage/Dispatch; Use By Others; Disposal; Transport - B+B S-Eco 2 Mode D'emploi

S-ECO 2
| Standard wheelchair

10. Storage/dispatch

If the wheelchair is going to be stored or transported, all removable
and not tightened parts, except of the drive wheels, have to be removed
and packed in separate cartons. The separately packed parts can be
packed together in a larger carton.
It is recommendable to keep the original packaging for this purpose, so
that it is available in case you need it. In that way your wheelchair is
protected against environmental influences during storage or transport.

11. Use by others

The S-Eco 2 is appropriate for use by others. For use by others, the
wheelchair must first be thoroughly cleaned and disinfected according
to the accompanying care and hygiene instructions.
The product shall get checked by an authorised dealer for general
condition, wear and shall get repaired if necessary.

12. Disposal

If your wheelchair is no longer needed and you want to dispose of it,
please contact your authorized dealer.
29
If you want to dispose your wheelchair yourself,
please ask your local disposal company for the
applicable disposal regulations in your town or city.
Standard wheelchair |

13. Transport

You can determine whether or not your wheelchair is approved for use
as a seat in a vehicle for transporting disabled people by referring to
the symbols on the CE sticker on the product:
•
Wheelchair suitable for use as a seat in a vehicle for
transporting disabled people (Fig. A)
•
Wheelchair not suitable for use as a seat in a vehicle for
transporting disabled people (Fig. B)
•
Fixation points on the restraint system (Fig. C)
All products approved by B+B for use as seats in vehicles are tested in
accordance with ISO 7176-19.
The tests in accordance with ISO 7176-19 were performed using
restraint systems from AMF-Bruns. The correct mounting of the restraint
system is a prerequisite for the safe transportation of the products in a
vehicle for transporting disabled people and the basis for the approval.
The restraint systems from AMF-Bruns provide the ideal points for the
provision of restraint force for the purpose of securing the products in
the vehicle for transporting disabled people (known by the German
term „Kraftknoten", which is defined in the standard DIN 75078-2).
For the purpose of providing restraint in the vehicle for transporting
disabled people (Fig. C), the products must only be secured at these
specific points („Kraftknoten" points). If possible, use a permanently
installed car seat and its belt system. Stow the wheelchair in the
luggage space. The person responsible for the transportation should be
familiar with the current regulations for transportation as well as with
the method of operating the vehicle for transporting disabled people
and the restraint system.
Anchored 4-point restraint systems must be used to secure the
wheelchair in the vehicle.If you have any queries about securing your
product in a vehicle for transporting disabled people, please contact
the B+B customer service department on +49 (0)700/60007070.
Bischoff & Bischoff GmbH | 13.02.2020
S-ECO 2
A
B
C
30