Nilfisk BA 551 Instructions D'utilisation page 78

ENGLISH
Available brushes and their relevant application guides (suggestions only)
Models
General cleaning:
Concrete
Terrazzo fl oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles
Cylindrical brush installation/removal (only for BA 551CD)
1. Turn the ignition key (80) to "0".
2. Lift the cylindrical brush deck by pressing the pedal (11).
3. Remove the handwheels (A, Fig. 3) and the lids (B) by pushing them downwards and pressing on the handwheels.
4. Install the cylindrical brushes (C).
The cylindrical brushes can be installed on either sides.
5. Install the lids (B) and fasten them with the handwheels (A).
6. To remove the cylindrical brushes, perform steps 1 to 5 in the reverse order.
A
B
C
Available cylindrical brushes and their relevant application guides (suggestions only)
Models
General cleaning:
Concrete
Terrazzo fl oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
16
USER MANUAL
MIDLITE GRIT 180
D
POLYPROPYLENE 0.40
909 6752 000(3)2010-03 A
MIDGRIT 240 PROLENE
E
Figure 3
HARD NYLON 0.60
BA 551 - BA 551D - BA 551CD - BA 611D
PROLITE UNION MIX
A
B
C
SOFT NYLON 0.45
S311318