Operation; Control Panel; Button Function - ROBLIN Lido/2 Murale Clean-air Mode D'emploi Et Installation

GB
4

OPERATION

Button Function
Turns the suction motor on and off at the last
A
speed used.
B Decrease the working speed.
C Increase the working speed.
Activates intensive speed from any other
D
speed even with the motor off. This speed is
timed to run for 10 minutes, after which the
system returns to the previous speed. Suitable
to deal with maximum cooking fumes.
E Activates the motor at a speed that allows
extraction of 100 m
hour, after which the motor stops.
When the filter alarm is on, press the button
for approximately 3 seconds to reset the
alarm. These indications are only visible
when the motor is turned off.
F Activates automatic shutdown after 30'. Suit-
able to complete elimination of residual
odours. Can be activated from any position,
and is turned off by pressing the button or
switching the motor off.
G
Turns the main lighting system on and off.
9
A B C D

Control panel

3
/h for 10 minutes every
E F G
Display
Displays the speed set
Displays HI and the bottom right hand spot
flashes once a second.
Displays 24 and the bottom right hand spot
flashes, while the motor is turned on
On completing the procedure the previous
indicator is turned off:
FF
indicates that the metal grease filters
need washing. The alarm is triggered
after the Hood has been in operation
for 100 hours.
EF indicates that the activated charcoal
filter needs changing and the metal
grease filters need washing. The
alarm is triggered after the Hood has
been in operation for 200 hours.
Alternately displays the working speed and
the time remaining before the hood turns
off. The bottom right hand spot flashes.