ADEO SCREEN BASIC Manuel D'installation Et D'utilisation page 13

ENGLISH – Rolling screen installation and operation manual
PROGRAMMING END STOPS MOTOR SOMFY RTS 230V 50Hz/120V 60Hz (procedures already carried out in factory, SHOULD NOT be performed by unauthorised personnel)
Move the
screen surface
to down limit
switch.
Move the
screen surface
to up limit
switch.
1.GUARANTEE LIMITATIONS The Manufacturer guarantees that all the products it distributes are free of production-, material- and processing-related defects, without prejudice to the following terms and
conditions:
* The product is guaranteed for a period of twenty-four (24) months
as from the date of the purchase invoice/receipt released to the end user
2.CONDITIONS AND LIMITATIONS This guarantee is subject to the following conditions and limitations:
the guarantee shall be deemed null and void if: the product has been used or manipulated in any manner other than those indicated in the user manual's instructions; or damaged as a result of improper use,
or owing to accident or negligence during transport; or if the product's defect is the result of repair or manhandling on the part of anyone other than personnel authorized by our Customer Care office.
The product must be installed by trained and experienced insider professionals, following the instructions provided for the installation and maintenance procedures.
3.RETURNS No product shall be returned and accepted without an authorization (RMA) released by Customer Care.
Products must be returned in their original (or equivalent) packaging to avoid being damaged during transport. Any transport damages resulting from inappropriate packaging shall not be covered by this
guarantee.
The returned product shall be accompanied by a detailed description of the defect and by a photocopy of the original purchase invoice/receipt.
The purchase invoice/receipt shall clearly indicate the following: Model – Serial number – Purchase date – Name and address of the purchaser and authorized dealer.
Made by Adeo Screen Sp. Z o.o. (Poland) Specifications are subject to change without notice. E&OE
Doc: BASIC Installation Manual rev2 | 12.06.2017
Please verify that you are working with the latest revision of this document before specifying your screen.
10 END STOP NICE MOTOR ADJUSTMENT
A – Left Motor
1 Press both
and
same time until you will see
a brief up and down motion
of screen surface.
1. Press both
and
same time until you will see
a brief up and down motion
of screen surface.
Back fall - C
Frontal fall - D
Down limit switch
2
Move the screen with
at the
to reach the desired
down limit position.
Up limit swicht
2
Move the screen with
at the
to reach the desired up
limit position.
GUARANTEE
B – Right Motor (standard)
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
3
4
buttons
Press button until you
will see a brief up and down
and
motion of screen surface to
memorize the new position
Page 13