Installation Guide - Phonocar VM 030 Notice De Montage Et D'emploi

Installation Guide

GB
If you are not sure how to install this unit correctly, contact a qualified technician.
Installation Procedures
1. Remove other audio system from the car.
2. Insert mounting collar into the dashboard.
3. Attach the brackets to the main unit.
Make sure to use the supplied flat head screws (M5x6mm).
4. Do the required electrical connections.
5. Install the main unit in the dashboard.
Make sure to use the supplied pan flat head screws
(M2.6x5mm).
6. Turn on the unit and slide down the panel, then attach the trim plate.
37