Publicité
Les langues disponibles
Les langues disponibles
Crouse-Hinds
1. Safety instructions:
For skilled electricians and trained
personnel in accordance with national
legislation, including the relevant
standards and, where applicable, in
acc. with IEC 79-17 on electrical
apparatus for explosive atmospheres.
Observe the national safety rules and
regulations for prevention of accidents
as well as the following safety
instructions which are marked with
an (
) in these operating instructions!
The charger must not be installed in
a hazardous location!
The indications on the charger are to
be observed!
Modifications to the charger or
changes of its design are not
permitted!
intended purpose and in perfect
condition!
For replacing components, only
genuine CEAG spare parts may be
used!
Repairs may only be carried out by
CEAG or a qualified "electrician"!
Only the type HE 8 N EN lamp may
be charged by means of this charger
(also see HE 8 N EN operating
instructions)!
Non-rechargeable batteries (dry
batteries) must not be put in the
charger!
Prior to opening the charger, pull the
mains plug!
Prior to putting the charger into
service, check its correct functioning
and perfect condition in accordance
with these operating instructions
and other applicable regulations!
Dimensions in mm
2. Conformity with standards:
This charger meets the requirements of DIN
EN 60335-1 and of the EC directive on
"Electromagnetic compatibility" (89/336/EEC).
The charger has been designed, manufactured
and tested according to the state of the art
and to EN 29001 (ISO 9001).
This charger is suitable for use in protected
and dry locations.
3.Technical data
Charger:
LG 483
Input voltage:
220V - 250V 50/60Hz
Power input:
12..15 VA
Recharge period:
See operating
instructions HE 8 N EN
Permissible
ambient temperatures
(also see HE 8 N EN
operating instructions)
during the charging
process:
-40°C to +30°C
Storage in original
packing:
-40°C to +60°C
Protection category to
EN 60529 (IEC 529):
IP 31
Insulation class to
EN 60598:
II
Geometrical data
of the charger:
Dimensions in mm
(d x w x h):
155 x 165 x 111
Weight:
appox. 1.25 kg
4. Description and application
The charger serves for charging and storing
the HE 8 N EN portable lamp (also see HE 8 N
EN operating instructions).
It is fitted with an apx. 1.5 m long mains
connecting lead with mains plug. On the back
of the charger there are three drilled holes
which can be used for fastening the charger
(see attached drilling template).
There are two light emitting diodes built into
the front panel by means of which the
charging process and mains supply are
checked.
Yellow LED -
healthy mains
Red LED -
battery on charge
Subject to alteration or supplement of
the product series.
CEAG Sicherheitstechnik GmbH
3 3 3 3 3
Publicité
