Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Description of the appliance
Operating principle
● Supply of heat is through electrical heating elements below the frying area.
● The heating elements are thermostatically controlled.
● In the event of overheating, for example due to a defect in a component, switching off is carried
out by the safety temperature limiter.
3.1
Description of the functional components
Clamping screw
4.
Commissioning
The appliance must be professionally connected before it is switched on. The on-site electrical con
nected loads must match the connected loads on the appliance! For setting up and connecting, see
page 30, chapter 9.
. Before using the appliance for the first time, clean with a cleaning product that dissolves grease.
● Cleaning and care, refer to page 25, chapter 6.
4.1
Getting ready for use
Clamping
screw
Drain
Drain plug
Drain pipe
Drain
Rotary switch
Temperature limiter reset button
Drain plug
Heat frying surface
Adjustable feet
Indicator lights:
Green = Appliance switched on
Yellow = Indication for heating process
. Insert the drain plug in the drain opening.
. Place on the drain and secure using a clamp
ing screw.
. Spread fresh fat or oil over the griddle as re
quired.
en
23 / 66
Publicité
Table des Matières
