KitchenAid 720-0745 Instructions D'installation Et Guide D'utilisation Et D'entretien page 11

Attach Left Side Shelf
1. Unpack left side shelf.
2. Open grill lid.
3. Remove 3 screws from the side of the side shelf.
A. Side shelf screws
4. Remove the 3 screws on the grill side panel and 1 screw on
the grill control panel.
A
B
A. Grill side panel screws
B. Grill control panel screw
5. Lower the side shelf so that the side shelf center post (A)
slides into the bracket (B) and align the bottom keyhole slots
on the side shelf with the screw holes on the grill side panel.
B
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the bracket to hold the weight of
the side shelf.
6. Attach the top of the side shelf to the grill (B) by inserting the
3 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 8.
7. Attach the bottom of the side shelf to the side panel (A and D)
of the grill by inserting the 3 screws removed from the grill
side panel in Step 4. The drip pan may need to be pulled
forward to install the center screw (D). Tighten the screws.
See illustration in Step 8.
8. Attach the side shelf to the control panel (C) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
A
A
9. Make sure that the push bar screw cover is separated from
the the screw plate.
A
10. Attach side shelf push bar by aligning the screw holes on the
side shelf with the screw holes in the push bar. Insert the
screws into the push bar screw holes and then into the side
shelf and tighten. Push in the push bar screw covers on both
sides to cover the screws.
D
B
C
11