Knick Stratos Pro A2 COND Série Guide Rapide page 8

Operating Modes / Functions
Meas. mode
(main display
selectable)
Pressing the menu key (down arrow) opens the selection menu.
Select the menu group using the left/right arrow keys.
Pressing enter opens a menu item. Press meas to return.


Manual activation of HOLD mode, e.g. for sensor replacement.
The signal outputs behave as configured (e.g. last measured value, 21 mA)



(Access via
code, factory
setting:
5555)
8
TAG display
after 60 s
Display of calibration data
Display of sensor data
Self test: RAM, ROM, EEPROM, module
Logbook: 100 events with date and time
Display of direct, uncorrected sensor signals
Display of software version, model designation, serial number
Calibration with calibration solution
Calibration by entry of cell constant
Product calibration
Adjustment of temperature probe
Configuring parameter set B: See previous page
Configuring parameter set B
Display of measured values for validation (simulators)
Current source, output 1
Current source, output 2
Relay test (A4... only)
Controller: man. specifi cation of controller output (A4... only)
Specifying access codes for operating modes
Reset to factory setting
Enabling an option via TAN
CLK display
after 60 s
A4... only: Controller
parameter display
(if configured)