Dometic RMDT10 5T Série Instructions De Montage page 26

Installing the refrigerator-oven combination
4.8 Install the roof vent
No. in
fig. g, page 12
1
2
➤ Seal the installation frame to make the connection waterproof (fig. h, page 12).
➤ Insert the installation frame and screw it down tightly (fig. i, page 12). Use all
the fixing holes for this.
➤ Insert the hood and screw it down tightly (fig. j, page 12).
4.9 Securing the refrigerator-oven combination
!
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
I
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
➤ Move the refrigerator-oven combination into its final location.
➤ Fasten the six screws (fig. k 1, page 13) through the six plastic washers in the
sides of the refrigerator, and further into the wall.
➤ Put the caps (fig. k 2, page 13) onto the screw heads.
26
Description
Hood
Installation frame
RMDT10.5(X)T
EN