Telescopic Wand Adjustments
Wand Length
Adjust Button
Bouton d'ajustement
de longueur du tube
Control de extensión
adjustable del tubo
On-Off Switch
Keep Hand
Above This Tab
Garder la main
au dessus de
cet onglet
Manténgase la
mano arriba
esta lengüeta
OFF
FLOOR
OFF
CARPET
OFF
➢ Pull cord out of canister to desired
length. The cord will not rewind until
the cord rewind button is pushed.
➢ Plug the polarized power cord into a
120 Volt outlet located near the floor.
To rewind:
➢ Unplug the vacuum cleaner.
➢ Hold the plug while rewinding to pre-
vent damage or injury from the mov-
ing cord.
➢ Push cord rewind button.
➢ The wand length is adjustable and
requires no assembly.
➢ To adjust, simply push down on the
wand adjust button and slide the
upper wand to the desired height.
➢ When adjusting the wand length you
may have to hold the POWER NOZZLE
with your hand or foot.
➢ Select a switch position on handle.
➢ OFF
➢ FLOOR - turns on canister motor
only. Headlight is off.
➢ CARPET - turns on both canister
and Power Nozzle motors.
Headlight is on.
- 18 -