System Overview; Installation; Installing The Refillable Tank - unGer Stingray OS Mode D'emploi

T

2. System Overview

Stingray is a modular system. The handheld cleaning unit consists of the triangular cleaning head
®
equipped with either a microfiber pad or adapter plate and QuikPad, depending on the kit purchased.
The head is flexible and has an embedded spray jet in the center. The body of the unit can be opened to
change the tank and to change batteries.
The handheld unit can be used as a hand tool or can be extended/collapsed with extension poles. The
activation button on the back of the unit is used to release the cleaning solution.
Every pole section has an activation button to release the cleaning solution.
QuikPad and
Adapter
Stingray EasyClick
®
Extension Pole - Long
1,24 m

3. Installation

3.1 Installing the tank
1. Open the compartment on the handheld unit by sliding the green button back and
removing the lid (picture 1).
2. Remove cap from unit and unscrew cap. Fill with desired cleaning solution and replace
the cap (picture 2).
3. Do not fill tank inside handheld unit.
4. Maximum of 150 ml of liquid. Do not squeeze or overfill the tank. Do not direct bottle
towards face and eyes.
10
Stingray® Cleaning System OS
System Overview
Lid
Button
Connector
www.ungerglobal.com
Stingray
®
Refillable tank
Handle
Pin Hole
Stingray
®
Handheld
Stingray EasyClick
®
Extension Pole - Short
0,63 m
1
2