Thorough Cleaning - Cembre B35-50MD Notice D'utilisation Et Entretien

ENGLISH
3.1) Using the battery charger
Carefully follow the instructions in the battery charger manual.
4. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance.
Compliance with the following points, should help to maintain the optimum performance of the
tool:

4.1) Thorough cleaning

Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any residue,
especially close to moveable parts.
4.2) Storage
(Ref. to Fig, 4)
When not in use, the tool should be stored and transported in the plastic case to prevent damage.
The case is suitable for storing the tool, the accessories and die sets.
Plastic case: VAL P22, size 465x315x135 mm (18.3x12.4x5.3 in.) weighs 1,5 kg (3.3 lbs).
5. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or, if no other refer-
ences are available, indicate the approximate purchase date and the tool serial number.
7