Color Control Channels; Cleaning And Maintenance - EuroLite LED QMS-8 RGB Mode D'emploi

L4
Control channel 3 – Each device occupies 6 channels. Four devices occupy 12 channels
L8
Control channel 4 – Each device occupies the same 6 channels as every other. Four
devices occupy 6 channels.

Color Control Channels

Linear colour change following the movement of the slider.
Channel: Characteristic
1 Rainbow effect with increasing speed
2 Red 0 – 255
3 Green 0 – 255
4 Blue 0 – 255
5 Strobe effect 1 – 20 Hz
6 Sound control ON/OFF
Channel 1 (Rainbow) must be on 0 (OFF), in order to mix colors (channels 2-4) in DMX mode.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
CH CH
1-6 1-6
CH CH
1-6 1-6
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
CH CH
7-12 7-12
CH CH
1-6 1-6
20/39 51930260_V_1_1.DOC