Installing/Replacing The Lamp; Danger To Life - EuroLite PAR-64 Spot Mode D'emploi

If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
OVERVIEW
INSTALLATION

Installing/Replacing the lamp

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).
During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's
notes!
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.

DANGER TO LIFE!

Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
11
(1) Housing cover
(2) Mounting-bracket
(3) Extension spring
(4) Hole for safety rope
(5) Tube
(6) Colour filter frame
(7) Silicone cable
(8) Mounting bracket screws
(9) Hole for safety rope for colour
filter frame
(10) Clip-to-hold clamps