Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at
all times. If you give the equipment to any other per-
son, hand over these operating instructions and
safety regulations as well. We cannot accept any lia-
bility for damage or accidents which arise due to a
failure to follow these instructions and the safety
instructions.
Scope of use
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufactur-
er will be liable for any damage or injuries of any
kind caused as a result of this.
1. Safety instructions
1.1 Safety instructions for working with
copressed air and blasting guns
Compressors and lines reach high temperatures
n
during operation. Avoid contact! Risk of burns!
Gases or vapours drawn in by the compressor
n
have to be kept free of constituents that may
cause fire or explosions inside the compressor.
When you disconnect the hose coupling, hold
n
the coupling element in your hand to prevent
injury from the whiplashing hose.
Wear goggles when working with the blow-out
n
gun. Injuries may easily result from foreign
bodies and blasted parts.
Never point the blow-out gun at other persons
n
and never use it to clean clothes that are still
being worn.
Keep these safety instructions in a safe place.
2. Items supplied
1. Tire pressure gauge
2. Valve connector
3. Tire inflating adapter
3. Quick-release coupling
Connect
Push the nipple on your compressed air hose into
the quick-release coupling, the sleeve will automati-
cally spring forwards.
Disconnect
Pull back the sleeve and remove the hose.
Important. As you release the hose coupling,
hold the hose coupling part in your hand to pre-
vent injuries caused by the hose being thrown
backwards
4. Operation
Tire pressure gauge
n
Working pressure in bar: 0-8
Range of applications:
The tire pressure gauge allows you to inflate
tires easily and exactly. Use the pressure gauge
to check the tire pressure. If the tire pressure is
too high, you can reduce the pressure with the
integrated relief valve (b).
After filling with air, please check the set tire pres-
sure with a calibrated gauge, for example at a
petrol station.
Depending on the intended use the valve connec-
tor (2) or the tire inflating adapter (3) can be
screwed on to the air hose (c).
5. Cleaning and maintenance
5.1 Cleaning
We recommend that you clean the appliance
n
immediately after you use it.
Clean the accessories after use with a suitable
n
cleaning agent (observe the instructions on the
working materials).
GB
5
Publicité
Table des Matières
