Cleaning And Maintenance; Ordering Replacement Parts; Disposal And Recycling - EINHELL 41.332.00 Mode D'emploi D'origine

Anleitung_4133200_SPK1:_
GB
6. Quick-release coupling
Connect
Push the nipple on your compressed air hose into
the quick-release coupling, the sleeve will automati-
cally spring forwards.
Disconnect
Pull back the sleeve and remove the hose.
Important. As you release the hose coupling,
hold the hose coupling part in your hand to pre-
vent injuries caused by the hose being thrown
backwards.
The compressed air hose is also fitted with a quick-
lock coupling to which accessories can be connected
as described above.
7. Operation
Unscrew the tank (1), fill it with the material you wish
to spray and reseal it.
Connect the compressed air supply
Set the air pressure on the compressor's pressure
reducer.
The infinitely variable trigger lever (5) allows an exact
dosing of the spray material.
The rotating nozzle (2) allows you to adjust the ratio
of material to the volume of air and to infinitely adjust
the spray angle.
Tip: Before starting work, you should conduct a small
test on newspaper to find the ideal settings for
achieving perfect results..
6
30.08.2010 10:57 Uhr Seite 6

8. Cleaning and maintenance

8.1 Cleaning
We recommend that you clean the appliance
immediately after you use it.
Clean the accessories after use with a suitable
cleaning agent (observe the instructions on the
working materials).

8.2 Ordering replacement parts

Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.