Jotul F 360 Advance Manuel D'installation page 20

ENGLISH
7.1 Replacing parts in the burn
chamber
Use tools with great care. The Skamol panel (back burn plate)
should be handled with care to avoid damage.
Replacing the baffl e plate
Fig. 33
1. Lift the baffl e plate (A) and turn the key (B) 90° in the baffl e
plate (A) and then remove the key. Lift the rear edge of the
baffl e plate and tilt it out.
20
Replacing the burn plates
Fig. 34
A
B
1. Lift the baffl e plate (A) slightly and remove the side burn
plate (B) from the burnchamber. Note! The baffl e plate
B
keeps the side burn plates in position. Make sure that the
burn plates do not fall down when the baffl e plate is being
A
liftet.
2. Remove the side burn plate (C) on the other side from the
burnchamber.
A
C