Safety Instructions; Electrical Connection - Electrolux KBB5X Mode D'emploi

18 www.electrolux.com
• Do not use water or steam spray to clean the
appliance.
• Clean the appliance with a soft damp cloth. Only use
neutral detergents. Do not use abrasive cleaners,
scouring pads, solvents or metal objects.
• Do not use this appliance to store explosive
substances such as aerosol cans containing a
flammable propellant.
• If the power cord is damaged, it must be replaced
by the manufacturer, an authorised technician or a
qualified person in order to avoid dangerous situations.

2. SAFETY INSTRUCTIONS

2.1 Installation
WARNING!
The appliance must be installed
by qualified personnel.
• Remove all packaging materials.
• Do not install or use the appliance if it
is damaged.
• Follow the instructions provided with
the appliance.
• Always handle the appliance with
care as it is very heavy. Always wear
safety gloves.
• Make sure that air can circulate freely
around the appliance.
• Wait at least 4 hours before
connecting the appliance to the
mains. This allows the oil to flow back
into the compressor.
• Do not install the appliance near
heaters, stoves, ovens and hobs.
The back of the appliance must rest
against the wall with duct.
• Do not install the appliance in an area
exposed to direct sunlight.
• Do not install this appliance in places
that are too damp or cold, for example
in structural additions, garages or
cellars.
• To move the appliance, lift it up from
its front edge so as not to scratch the
floor.

2.2 Electrical connection

WARNING!
Risk of fire and electrical shock.
• All electrical connections must be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical data on
the rating plate corresponds with the
values of the power supply system. If
not, contact an electrician.
• Always use an electrical outlet with
an adequately installed protective
contact.
• Do not use power strips and extension
cords.