Maintenance And Care; Cleaning, Maintenance And Storage; Technical Specifications - AEG RC 3.5 Notice D'utilisation

26
5.0 MAINTENANCE
AND CARE
5.1 Cleaning, maintenance and
storage
5.1.1 Caution! Power off the monitor and un-
plug the vehicle's 12 V power supply before
cleaning the monitor.
5.1.2 Clean the backup camera system with a
dry cloth. Do not use liquids or harsh cleaners as
these may cause discoloration and damage to the
surface of the equipment and the backup camera
system may be damaged! Do not allow liquids to
enter the equipment! Never immerse the equip-
ment in liquids! Only operate the backup camera
system when dry.
5.1.3 Always keep / store the backup camera
system in a dry environment! Moisture may
damage the electronics of the backup camera
system!
5.1.4 Do not store the backup camera system
under extreme temperature fluctuations! Conden-
sation generated under these conditions could
damage the electronics!
5.1.5 If the camera joint loosens over time you
may readjust it. There are 4 screws at the back of
the camera inside the camera bracket. Slightly
tighten these screws to secure the swiveling
camera. This requires the camera to be dis-
mantled.
6.0 TECHNICAL
SPECIFICATIONS
Device designation:
Item number:
Service and operating -10 C to + 50 C
temperature:
Backup speed:
Transmission range:
Monitor:
Diagonal screen size: 3.5 " / 8.9 cm
Resolution:
Dimensions:
Technology:
Power supply:
Fuse:
Fuse type:
Camera:
Resolution:
Night vision:
View angle:
Color sensor:
Exposure
compensation:
White fader:
Camera tilt:
Power supply:
IP Class (protection
type):
Transmitter
Transmission:
Range:
Power supply:
backup camera system
RV 3.5
97152
°
°
(Celsius)
max. 3 km/h
(kilometers per hour)
max. 10 m (meters)
320 x 240 pixel
approx. 100 x 75 x 22
mm ( l x w x h mm )
LCD color display
12 V (Volt) direct current
1 A (Ampere)
T1AL250V
640 x 480 pixel
7 infrared LEDs
110
°
1/4 " color CMOS
automatic
automatic
variable adjustment
angle to approx. 30
°
12 V (Volt) direct current
IP68, waterproof
2.4 GHz (Gigahertz;
cycles per second)
max. 10 m (meter)
12 V (Volt) direct current
This equipment complies
with EC directives
▪ R&TTE Directive
1999/5/EC
▪ Electromagnetic
Compatibility (EMC)
Directive (2004/
108/EC)