Product Overview; Installation/Operation; Installing The Backup Camera System - AEG RC 3.5 Notice D'utilisation

20

3.2 Product overview

1
11
10
9
8
Image 1
Camera with 7 infrared LEDs and connec-
1
tion cable with plug for connecting to the
transmitter
Monitor cable with 12 V plug for con-
2
necting to the cigarette lighter, with 1A
(ampere) fuse
LCD monitor 3.5" (8.9 cm)
3
Cable ties for securing the transmitting
4
equipment
Thread screws for attaching the camera to
5
the mounting bracket
Clamping nuts for securing the thread
6
screws
Clamped connections for connecting to
7
reversing light wires
Plastic ring as edge protector for the cable
8
feed boreholes
Brackets for mounting the camera
9
Monitor arm with suction cup base for
10
securing the monitor to the windshield
Radio transmitter with connector cable and
11
socket to the camera, including connector
cable with a red and black cable for
connecting the transmitter to the reversing
light.
2
6
7
4.0 INSTALLATION /
OPERATION
3
4.1 Installing the backup camera
system
Caution! Due to differences in technical and
design-related vehicle types, these instructions for
4
use do not apply to all vehicle models.
Step 1: Remove license plate
First remove the rear license plate and, if appli-
cable, also the license plate frame (see image 2).
5
Image 2
Step 2: Hole for camera cable
Now look for an opening / drill hole near the li-
cense plate opening into the interior of the vehicle
to feed the connector cable plug of the camera
into the interior of the vehicle. For added visibility
and easy installation remove the interior trim near
the license plate. If the vehicle has no opening,
drill a hole using an 11 mm (diameter) drill bit in
the area covered by the license plate.
Caution: be sure there are no elec-
trical wires or other automotive parts
in the area where you will be drilling
which could be damaged!
To protect the borehole in the metal panel from
corrosion the metal edges should be coated with
a suitable paint coating (e.g. automaker's touch-
up pen) and allow to dry adequately.
1