Automatic Door Opening; Home Network; Automatic Display Lock For Cleaning - Gaggenau RF463706 Notice D'utilisation

en-us
Operating the appliance

Automatic door opening

The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to wear out or fail.
Do not close the door as long as automatic door
opening is still moved out.
If you have nevertheless closed the door, leave it
closed for 5 minutes. Automatic door opening will
re-adjust itself.
Open the menu item Automatic door opening:
1. Press à button to open the main menu.
2. Press B button to move to the Basic settings menu.
Press ™ button to open the menu.
3.
4. Press B button to move to the menu item Automatic
door opening.
5. To change the setting, press % button.
Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Rest mode is activated.
1.
Open the menu item Automatic door opening.
2.
Select menu item Push-to-open system.
Press ™ button to open the menu item.
3.
4.
Select Opening force.Here you can select the level of
force required to activate automatic door opening.
5.
Select Opening duration.Here you can select how long
the door should remain open a crack before it closes
again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
20
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1.
Open the menu item Automatic door opening.
2.
Select menu item Pull-to-open system.
3. Press ™ button to open the menu item.
4.
Select Opening force.Here you can select the level of
force required to activate automatic door opening.
Switching off automatic door opening
1.
Open the menu item Automatic door opening.
2.
Select menu item Off.

Home network

You can use this function to establish a connection
between the refrigerator and your mobile device.
~ "Home Connect" on page 22

Automatic display lock for cleaning

You can use this function to select whether the automatic
clean lock is switched on automatically when the door is
opened.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
Press ™ button.
3.
4. Press B button to move to the menu item Automatic
display lock for cleaning.
5. To change the setting, press % button.