Logitech Zone Wireless Plus Guide D'installation page 5

PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER
www.logitech.com/
support/unifying
1 Download Logitech Unifying Software at www logitech com/support/unifying
®
2 USB-A
Insert the Zone Wireless Plus receiver into the computer USB-A port
USB-C
Insert the USB-A receiver into the USB-C adapter Then insert the adapter into the computer USB-C port
3 Zone Wireless Plus headset is already paired to the receiver it ships with Just power on the headset
Once successfully paired, the light indicator on the receiver will remain solid white Light indicator on
the headset will turn solid white
4 To pair mice and keyboard,
a Open the software and continue clicking "Next" on the bottom right corner If you already have other
unifying receivers (with
b Locate the OFF-ON slider on your mice and keyboard Turn each device off and back on to restart
your devices and finish pairing
- If paired, please follow the on-screen prompt and test it out to confirm successful pairing
- If pairing failed, please retry or refer to our support page
www logitech com/support/zonewirelesspluspairing
NOTE: you can pair up to 6 Logitech Unifying peripherals
ADJUSTING HEADSET
1 Adjust headset by sliding earcups up and down
the headband
2 It may be easier to adjust the headset on your head
Move the earcups up and down the headband until
they sit comfortably on your ears
ADJUSTING THE MICROPHONE BOOM
1 Microphone boom rotates 270 degrees Wear it on either
left or right side Audio channel will switch automatically,
depending on the direction you are wearing
the microphone
2 Flexible microphone boom — adjust boom location
to capture voice better
USB-A
USB-C
logo), please unplug them
Advanced Next
OFF/ON
5 English