IKRA MPTE 7520 Manuel D'utilisation page 21

Electric Telescopic Pruning Saw MPTE 7520
Content
Abbildungen.......................................................................1 - 3
1. Intended use......................................................................4
2. General safety regulations.................................................5
3. Explanation of symbols......................................................8
4. Description of the machine and scope of delivery.............9
5. Assembly...........................................................................9
6. Operation...........................................................................9
7. Working with the chainsaw................................................10
8. Technical data....................................................................12
9. Maintenance......................................................................13
10. Cleaning and storage........................................................13
11. Information for environmental protection / disposal..........13
12. Repair Service...................................................................13
13. Ordering spare parts.........................................................13
14. Warranty............................................................................13
15. Fault remedy......................................................................14
16. Declaration of conformity...................................................15
Packaging
This machine is packaged to prevent damage during transportation. The packaging is raw material and can thus be
reused or fed back into the raw materials cycle.
When using the machine certain safety precautions must be taken in order to prevent injuries and damage:
• Read through the operating instructions carefully and observe the instructions contained therein. Familiarise your-
self with the machine, its correct use and the safety devices by means of these operating instructions.
• Store these carefully so that the information is always available to you.
• In the event of the machine being handed over to another party, please include these operating instructions with it.
We accept no liability for accidents and damage caused as a result of disregarding these instructions.
1. Intended use
The electric branch saw is only suitable for cutting branches on standing trees. The electric branch saw is not suitable
to cut down trees, saplings or shrubs. This chain saw may only be used by one person to saw wood. The chain saw
must be held with the right hand on the rear handle and the left hand on the front handle. Before using the chain saw,
the user must have read and understood all information and instructions in the operating instructions. The user must
wear appropriate personal protective equipment (PPE).
The chain saw is only permitted to be used to cut wood. Materials such as plastic, stone, metal or wood that
contains foreign matter (such as nails or screws) are not permitted to be cut.
Residual risks
Residual risks remain even if you use this tool as intended. The following hazards can occur due to this tool's con-
struction and design:
1. Lung damage if a suitable dust mask is not worn.
2. Hearing damage if suitable hearing protection is not worn.
3. Cuts if suitable protective clothing is not worn.
4. Damage to health, which results from hand and arm vibrations if the device is used for an extended period or not
operated or maintained properly.
Warning! This machine generates an electromagnetic field when operated. This field can affect active or passive med-
ical implants in certain circumstances. In order to reduce the risk of severe injury or death, we recommend that people
with medical implants consult their doctor or the manufacturer of the medical implant before operating the machine.
GB | Operating Instructions
4
Translation of the original Operating Instructions