Technical Data - Parkside PKGA 14.4 A1 Instructions D'origine

GB

Technical Data

4in1 Cordless combination tool ... PKGA 14.4 A1
Motor voltage ........................... 14,4 V
Idling speed (n ) ....................21000 min
0
Sound pressure level (L
Sound power level (L
Motor unit with drill attachment ..............PKGA1
Idling speed (n ) ........ 0-400/0-1350 min
0
Torque .................................max. 25 Nm
Spread drill chuck ................... 1.0-10 mm
Drill diameter
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Weight (without charger) ................1,4 kg
Vibration (a )
h
drilling in metal .... 1,615 m/s
drilling in wood ... 1,475 m/s
Motor unit with multisander attachment ..PKGA2
Oscillation rate (n
0
Sanding sheet size
Weight (without charger) ................1,3 kg
Vibration (a ) ......4,383 m/s
h
Motor unit with sabre saw attachment ....PKGA3
Stroke rate (n ) .....................0-3200 min
0
Stroke length
Weight (without charger) ................1,7 kg
Vibration (a )
h
Sawing boards ................. 11,926 m/s
Sawing wood beams ........ 12,392 m/s
Motor unit with multifunction tool ...........PKGA4
Oscillation rate (n
0
Oscillation angle ..............................3,0°
Weight (without charger) ................1,3 kg
Battery (Li-Ion) .............................. PAP14.4
Nominal voltage ....................... 14,4 V
7 2
) ........ 86,7 dB(A),
pA
K= 3 dB
) ........... 97,7 dB(A)
WA
K= 3 dB
, K= 1,5 m/s
2
, K= 1,5 m/s
2
) ..............0-9000 min
.......138 x 97 mm
, K= 1,5 m/s
2
...................... 22 mm
K= 1,5 m/s
) ............0-20000 min
Capacity ...................................... 1,5 Ah
Charging time ...................... approx. 1 h
Recharger .......................... JLH-H150-14.4
Nominal consumption .....................40 W
-1
Voltage input .........100-240 V~, 50-60 Hz
Voltage output ............ 14,4 V
Protection class .................................
Protection category .......................... IPX0
Noise and vibration values have been de-
termined according to the standards and
-1
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, referenc-
es and information in this instruction manual
are therefore not guaranteed. Legal claims
made on the basis of the instruction manual
2
can therefore not be considered as valid.
2
The stated vibration emission value was
measured in accordance with a standard
-1
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
2
also be used for a preliminary exposure as-
sessment.
-1
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
2
the power tool is used.
2
Safety precautions aimed at protect-
2
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
-1
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
1500 mA
II