Destination Of Use; Use Limits - Aerfast AC4504 Mode D'emploi

GB
6- STATE OF "SWITCHED OFF MACHINE"
Before performing any type of maintenance and/or adjustment intervention on the machine, it is necessary to drain compulsorily the tank (no pressure), to disconnect power supply
source, as well as to verify that the machine is actually stopped and cannot be switched on suddenly (ON-OFF switch on pos. "OFF (0)" and power supply cable disconnected from
the mains outlet and positioned close to the machine).
7- WARRANTY
1) DECLARATION OF WARRANTY: the manufacturer undertakes towards the purchaser to replace, repair or otherwise intervene on the machine, in case of conformity defects jeopardizing its
correct use and operation, exclusively if such defects are due to the actual responsibility of the manufacturer. The manufacturer reserves the right of adopting the best solution to restore
the compliance of the machine within a reasonable period of time.
2) PURCHASER: the purchaser is called "consumer" when the purchase is carried out by an individual acting for purposes not belonging to his/her business or professional activity.
The purchaser is called "professional man/woman or company" when the purchase is carried out by a professional man/woman or by a company acting for purposes belonging to his/her/
its business or professional activity.
3) TERMS: the manufacturer is liable when the conformity defect arises within the following terms from the purchasing date; 24 months, if the purchase has been carried out by a "con-
sumer", as described under point 2); 12 months, if the purchase has been carried out by a "professional man/woman or company", as described under point 2);
4) VALIDITY: the warranty is valid when the purchaser notifies to the manufacturer the conformity defect within 2 months from the date in which such defect was first remarked. Such notice
must compulsorily be submitted together with a valid purchasing document (cash slip or invoice).
5) EXPIRATION: the warranty expires if the purchaser uses the machine improperly and/or in a way not complying with the instructions for use and maintenance supplied by the manufacturer,
or if the conformity defect has been caused by purchaser's lack of skill or by chance.
6) RESPONSIBILITY: the manufacturer cannot be made liable for any liability following any possible damages to the purchasers resulting from loss of or diminished production due to possible
conformity defects.
7) EXPENSES: Expenses related to labour and materials necessary to restore the conformity of the machine are at manufacturer's charge. Expenses and delivery terms are to be agreed upon
with the authorized dealer.
8- RESERVED RIGHTS
The reserved rights on this manual "use and maintenance instructions" remain property of the manufacturer. None part of this manual can be reproduced and disclosed (totally or partially) by
any reproduction means without written authorization of the Manufacturer. All quoted trademarks belong to the respective owners.

9- DESTINATION OF USE

FIELD OF USE
PLACE OF USE
FORESEEN USE
OPERATORS CHARGED WITH THE USE

10- USE LIMITS

This machine was designed and produced exclusively for the intended use described in par. 9, any other use and operation is therefore absolutely forbidden in order to assure in every moment
the safety of the charged operators, as well as the efficiency of the machine itself.
IT IS STRICTLY FORBIDDEN TO COMMISSION THE MACHINE IN ENVIRONMENTS WITH POTENTIALLY EXPLOSIVE ATMOSPHERE AND/OR IN PRESENCE OF COMBUSTIBLE DUSTS
(EX.: WOOD DUSTS, FLOURS, SUGARS AND MIDDLINGS).
LIMITATIONS IN USE: IT IS STRICTLY FORBIDDEN TO USE THE MACHINE FOR IMPROPER USES, DIFFERING FROM THE FORESEEN ONE (PAR. 9).
IT IS COMPULSORY TO KEEP THE MACHINE OUT OF THE REACH OF CHILDREN.
DURING THE USE, IT IS COMPULSORY TO VERIFY THAT NON-AUTHORIZED PEOPLE DO NOT GET CLOSE TO THE MACHINE.
IT IS STRICTLY FORBIDDEN TO USE AIR TUBES (EXTENSIONS), FITTINGS, AND TOOLS NOT SUITABLE AND/OR NOT COMPLYING WITH THE REGULATIONS IN FORCE.
IT IS STRICTLY FORBIDDEN TO LIFT THE MACHINE WITH CRANES AND/OR FORK LIFT TRUCKS.
IT IS STRICTLY FORBIDDEN TO DIRECT COMPRESSED AIR JETS AGAINST PERSONS, ANIMALS AND THINGS.
IT IS STRICTLY FORBIDDEN TO USE THE MACHINE TO TRANSPORT AND/OR LIFT PERSONS, ANIMALS AND THINGS.
IT IS STRICTLY FORBIDDEN TO GET ON THE MACHINE.
IT IS STRICTLY FORBIDDEN TO TOW THE MACHINE BY ANY MEANS AND/OR VEHICLE WHATSOEVER.
IT IS STRICTLY FORBIDDEN TO MOVE THE MACHINE MANUALLY ON UPWARDS AND/OR DOWNWARDS SLOPES WITH HAZARDOUS GRADE.
HAZARD OF BURNING BY ACCIDENTAL CONTACT WITH THE BI-CYLINDRICAL PUMPING ASSEMBLY AND THE ELECTRIC MOTOR. CAUTION! THERE IS A RESIDUAL RISK (SEE
PAR.21).
Industrial, craft and civil sector.
Indoor or outdoor places (provided that it is not subject to atmospheric agents) sufficiently
lighted, ventilated, with ambient air temperature and humidity values complying with par. 2,
suitable in compliance with the law provisions in force in the country of use on safety and
health in the places of work. The machine has to lean on a surface assuring its stability with
reference to its weight and its overall dimensions (see par. 2).
CAUTION! IT IS COMPULSORY TO KEEP THE MACHINE OUT OF THE REACH OF CHILDREN.
Air compression (without oil) for the use of suitable pneumatic tools complying with the regu-
lations in force. (ex.: guns for blowing, inflation, washing, painting or sandblasting; screwers;
spot welders, riveters or greasers).
An authorized operator meeting the professional requirements described in par. 5.
4