Korg C-320 Mode D'emploi page 41

Note: Unless the adjuster is in firm contact with the floor, the pedal will wobble,
possibly causing malfunctions
Instrument fastening bolts
Loosen adjuster to the correct position
Verify that all screws are firmly tightened. Finally, place caps on the heads of pedal
box screws (a).
Connect the included power cable to the AC adaptor.
10
DC plug
Connect the pedal cable and the DC plug of the AC adaptor to the bottom of the
11
instrument, and use the cable retainers to fasten the cables.
Assembling the stand
AC adaptor
Screw into holes on the
back of the instrument
Included power cable
39