Korg C-320 Mode D'emploi page 35

On the C-320, hold down the TRANSPOSE/FUNCTION button and press the
2
VIBES/GUITAR sound selection button. The indicators of the TRANSPOSE/
FUNCTION and VIBES/GUITAR buttons will blink, and the C-320 will wait to
receive the data dump.
Set the data filer to send the sound setting data that were previously saved from the
3
C-320. Please read the data filer owner's manual for details on data transmission.
The C-320 will receive the data.
When the data dump is finished, the C-320 will return to the same status it was
before the data dump.
During a data dump operation, the C-320 will not produce sound, and no other func-
tion will work.
You may cancel a data dump operation before the data dump begins, by pressing the
TRANSPOSE/FUNCTION or VIBES/GUITAR button.
MIDI
33