Roberts 10-182GP Manuel Du Propriétaire page 4

MAINTENANCE OF NON-STICK COATED BASE PLATE
1. The base plate is coated with a tough non-stick coating, to provide a long
lasting easy to clean surface. To preserve this finish, please follow these
steps:
a. Always put the iron in its holder when not seaming.
b. Never try to clean the base with a wire brush, knife or
any hard material.
c. Do not place your iron on concrete or other hard
surfaces. Put the iron in its holder, when storing it in
your toolbox.
d. ALWAYS CLEAN YOUR IRON AFTER A JOB.
2. To clean your iron, rub the base over a piece of clean carpet scrap while
the iron is still hot.
Specifications
Amps
Watts
Approx Heat Range
Volts
10-182GP, 10-282(G),
10-286G and 10-482G
6.6A
800W
370° F ~ 560° F (187° C ~ 293° C)
~120
– 4 –