Remote Control - HQ Power HQLE10040 Mode D'emploi

4.4 Connection
Have a qualified electrician carry out the electric connection.
Connect the device to the mains with the power plug. All devices must be
powered directly off a grounded switched circuit. Do not connect to a dimmer
pack.
The installation has to be approved by an expert before the device is taken into
service.
5. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
6. Operation
Connect the device to the mains using the included power adapter.
Switch on the device and select the working mode.
switch
Switch off and disconnect from the mains after use. Leave to cool completely
before storing.
7.

Remote Control

button
ON/OFF
SENS+/-
SPEED+/-
AUTO
SOUND
FLASH
V. 02 – 22/11/2017
power input
microphone
mode switch
description
1 on-off
2 sound mode
3 auto mode
description
device on-off
sensitivity control
speed control
auto colour change
sound mode
flash mode
HQLE10040
4
5
6
speed control
sensitivity control
©Velleman nv