EYENIMAL RT 250 Guide D'utilisation page 7

Polarity "-" of the battery
 Activate/deactivate the remote control
Remote control is supplied with battery fitted.
▪
Activate: as soon as the battery is in place, the remote control is ready for use.
▪
Deactivate: if the remote control is not to be used for a long period or if you wish to turn it off, you should remove the battery from its
housing.
 Activate/deactivate the receiver collar
A magnet located in the remote control is used to either switch On/Off the receiver collar.
▪
Activate: move the remote control towards the collar so that the red mark on the remote control comes into contact with the red mark
on the receiver collar, hold for 1 second (ref. Diagram 4).
The indicator light on the collar will flash in green indicating the receiver collar is on.
▪
Deactivate: move the remote control towards the collar so that the red mark on the remote control comes into contact with the red
mark on the receiver collar, hold for 1 second (ref. Diagram 4).
The indicator light on the collar will flash from green to red and then off: the receiver collar is off.
To increase the battery life of the remote control and receiver collar, you should deactivate the units if you are not using them for a long
period.
Polarity "+" of the battery
Place these 2 areas
together for 1 second
- 2 -
Seal
Diagram 3
Diagram 4