Hornbach 6145054 Manuel D'installation Et De L'utilisateur page 123

Tightening the screw adjusts
the awning towards a straighter
orientation.
Loosening the screw adjusts
the awning towards an inclined
orientation.
Once the desired pitch angle
is set, tighten the two nuts on
the side of the articulated arm
bracket, by use of a wrench.
Repeat the same procedure on
the other side of the awning.
Make sure to adjust the pitch
angle evenly on both sides, so
that the front profile 1 remains
horizontal.
The awning can withstand light
rain showers if the pitch angle is
15° or more.
To set a pitch angle of 15° or
more, extract the awning to the
length of 150 cm, set a 1 m level
on top the awning and hold it in
a level position.
The distance between level and
front profile must be 40 cm (15°)
or more so that the awning can
withstand light rain.
4
5
6
ENGLISH | 123