DeWalt DCE350 Guide D'utilisation page 15

LED Indications
INDICATION USER ACTION
Unit ON Press ON/OFF button
Unit OFF Press ON/OFF button
Plug tool into computer
via USB
Full Charge
Medium
Charge
Low Charge
Cycle Attempt a crimp/press
Complete
Cycle Not Attempt a crimp/press
Complete
Maintenance
Warning
Final
Maintenance
Warning
Needs Service
Temperature
Out of Range
LEDs
All 3 LEDs light in green for 1 second.
All 3 LEDs light in red for 1 second.
Maintenance LED lights in blue continuously.
nOTE: Indication is permanent as soon as tool is plugged in via USB.
Battery LED lights in green continuously.
nOTE: Indication is permanent as soon as tool is switched on.
Battery LED lights in yellow continuously.
nOTE: Indication is permanent as soon as tool is switched on.
Battery LED lights in red for 10 seconds, then tool turns off automatically.
nOTE: Indication is permanent as soon as tool is switched on.
Cycle Complete LED flashes in green for 5 seconds.
Cycle Complete LED flashes in red for 5 seconds.
nOTE: No action is possible until user presses ON/OFF button.
Maintenance LED lights in yellow continuously.
nOTE: 500 cycles left. Indication is permanent as soon as tool is
switched on.
Maintenance LED flashes in yellow continuously.
nOTE: 100 cycles left. Indication is permanent as soon as tool is
switched on.
Maintenance LED lights in red for 10 seconds, then tool turns
off automatically.
nOTE: 0 cycles left.
Maintenance and Cycle Complete LEDs light in red continuously.
nOTE: Indication is permanent as soon as tool is switched on.
LEDs turn off when acceptable temperature is reached.
English
EXAMPLE
GREEN
RED
BLUE
GREEN
YELLOW
RED
GREEN
RED
YELLOW
YELLOW
RED
RED
13