Schwaiger ALPHA 100 Mode D'emploi page 9

1. Front Panel (DiSEqC 1.0)
F1/F2 Channel up/down selection.
F3 Multifunction display
F4 Infrared eye
F5 Standby switch.
2. Rear Panel
R1 To an LNB with 13VDC/17VDC power.
R2 Decoder scart socket (in/out)
R3 TV scart socket.
R4 Audio L and R outputs.
R5 Adjust for a proper TV UHF channel.*
R6 TSG Switch.*
R7 To antenna input of a TV-set.*
R8 To an external UHF/VHF cable drop.*
R9 230 V AC Power Cord.
R10 12 V power supply socket (Modell Alpha 200/12 V)*
* ONLY with modell alpha 200!
16
3. On the Bottom
B1 : Video level adjustment
Remote handset
1 Change between
standby- operating function
2 No sound function
3 P/C Program lock
4 0-9 Buttons for
channel-/ frequency input
5 Programme up
6 Programme down
7 + Stepping up of the changeable
options in setup-modus
Switching polarisation (V/H)
and switch frequency
8 - Stepping down of the changeable
options in setup-modus
Switching polarisation (V/H)
and switch frequency
9 SET Activating and switchover
of the setup-functions
10 LNB Switching DiSEqC position
11 AUDIO Switching audio mode
(only possible in setup-mode!)
12 ENT Memory button
(only activated in setup-mode!)
13 TV/SAT Switching from SAT input to antenna input (only model alpha200!)
14 D/ON DiSEqC ON/OFF switch
B1
VIDEO LEVEL
17